1. Turn the light on
Press the power button to switch on the light.
2. Set the mode (front or rear) within 5 seconds
Immediately after turning it on, flip the light 180 degrees horizontally to toggle between modes:
- Front Mode: White light will appear.
- Rear Mode: Red light will show up.
3. Lock the mode
After 5 seconds, the light will lock into the mode based on its orientation.
4. Change the mode again
To switch modes, turn the light off, then turn it back on and repeat the flipping process within the first 5 seconds.
For additional guidance, refer to our tutorial video or contact us at support@unit1gear.com.