What You’ll Need
1️⃣ Philips screwdriver (standard size)
Step-by-Step Instructions
1. Prepare the Helmet
Turn the helmet upside down to access the interior.
Gently move the straps out of the way so you can clearly see the MIPS system
Locate the two screws embedded in the MIPS system near the rear light area.
2. Remove the Screws
Using the Philips screwdriver, carefully unscrew both screws from the inner side of the helmet.
Set the screws aside in a safe place, you’ll need them for reinstallation.
3. Remove the Light Unit
Once the screws are removed, the rear light component can be gently pulled out from the back of the helmet.
4. Install the New Light
Align the new light unit with the exterior part of the helmet.
Using the same screws, carefully screw the light back into place from the inside.
⚠️ Important:
Be careful not to damage the EPS system while using the screwdriver. Avoid applying excessive force.
Need Extra Help?
Watch the accompanying video tutorial to see each step in action for better understanding.